§ Catalog
Four chemistries, indexed against every stage of your line.
Each product line is sold with its own technical data sheet, safety data sheet, and a one-page line-tuning recommendation specific to your stucco, water and target board specification.
NG-R/A
01 / 04
Set Retarders & Accelerators
Tune the hydration window between hemihydrate slurry and the cut-off knife.
Injection: Pin mixer · pre-foam header
Set time delta± 5 s on a 1,800 m/h line
Calcium binding1.8 mol Ca²⁺ / mol citrate
Seed activity> 92% dihydrate / hemihydrate ratio
Open spec →NG-D
02 / 04
Dispersants & Water Reducers
Cut your water-to-stucco ratio and pay the kiln less per square metre.
Injection: Slurry mixing tank · pre-mixer water line
Water reductionup to 35% vs. neat slurry
Kiln energy saved5 – 9% gas burn
Slurry fluidity240 – 280 mm cone, 0.18% dose
Open spec →NG-F
03 / 04
Foaming Agents & Density Modifiers
Engineered foam architecture for lightweight, dimensionally stable board cores.
Injection: Foam generator · secondary slurry header
Foam density40 – 90 g/L delivered
Half-life window120 – 160 s
Board weight reductionup to 30% vs. standard core
Open spec →NG-S
04 / 04
Starches, Binders & Paper Bond
Hold the paper-to-core bond through the kiln — and through 30 years of service.
Injection: Mixer dry-add · paper line size press · core fiber blender
Paper bond> 95% fiber tear after 28 days
VHI absorption< 4.5% per ASTM C473
Type X core integrity55 min · ASTM E119
Open spec →